|
|
Solvent Cementer |
| Solvent cementing machines are roll coaters that were developed especially for the application of solvent based adhesive. The machine is able to apply heavy bodied solvent cement and rubber cement that will not run properly in most types of coating machines. | |||
|
Home Adhesives Edge Coaters Hot Melt HM Hot Melt RT Series Label Cementers Sheet Cementers Smoothing Press Topside Coaters Custom Machine Design Nip Rolls MSDS What's New 
|
Sizes: 8", 15"
|
|
Schaefer solvent cementers are equipped with several special features specifically designed for solvent cement: The motor and control switch are explosion proof, the machine has an internal pump to keep the adhesive circulating, and the machine is shrouded to extend adhesive life by minimizing the surface area available for solvent evaporation.
|
|
For cleanup, the entire coating unit is removed from the machine and soaked in solvent, and the tank is covered with a tight - fitting lid.
The Solvent cementing machines are available in two sizes - 8" and 15", and in two different feedroll configurations. The dual feedroll model (SR-2) is used for thin parts and flexible parts up to approximately 1/8" thick. For parts 1/8" and thicker the single feedroll model (SR-1) is used. The SR-1 can coat parts up to 4" thick.
|
|||
|
To find out more about our Solvent Cementer
CLICK HERE and use our information request form
(or call us.) |
|||
200 Commercial Drive
Deep River, CT 06417
(860) 526-4000
FAX 860-526-4654
|