Schaefer Edge Coater

Edge Coater - EC Series

Edge Coating Machine (model EC): The EC model is an edge gluer, which is a gluing machine designed for adhesive application along the edge of a part. This type of gluing machine has open end (cantilevered) rollers that allow adhesive application to either the edge of a sheet or to the full surface (up to the width of the gluing machine).

Adhesive Wax
Hot Melt HM
HRC Hot Melt Gluer New
Label Cementers
Sheet Cementers
Smoothing Press
Solvent Cementer
Topside Coaters
Adhesive Recirculation Systems
Custom Machine Design
Nip Rolls
What's New
Widths, 3", 8", 11", 15" The adhesive coating thickness is adjusted by means of a dial which controls the gap between the pickup roller that sits in the glue tank and the coating application roller.
The standard machine can glue parts from paper thickness to ¼ thick, but an optional model with floating feed roll can be used for adhesive application to parts up to 2" thick.
The position of the feedtable relative to the coating roller is adjustable so the machine can be set for gluing a narrow strip along the edge of a part or can be used for adhesive coating of the full surface. The edge cementing machine can be built with special rollers for coating stripe patterns or for application of a stripe of adhesive a pre-set distance from the edge of the part.
The Edge Coater can be used for the application of many types of adhesives - latex cement, dextrine glue, PVA and EVA resin cement, acrylic PSA adhesive, epoxy adhesive, ultraviolet cured adhesive, hot animal glue (heated glue tank), and many other types of coating and adhesive formulations. The machine is designed for easy cleanup, and has a removable glue tank and adhesive pickup roller. This design allows glue to be cleaned from the machine in less than ten minutes.
Edge Coating machines are very popular for the application of latex cement to leather goods such as wallets, handbags and belts, as well as to shoe and boot components. These machines are also used for gluing many other products where a band of adhesive is needed: calendars, easel backs, sample books, specialty boxes, filters and toys are just a few of the other applications for these machines.

To find out more about our edge coaters CLICK HERE and use our information request form
(or call us.)
Schaefer Machine Company Inc.     200 Commercial Drive     Deep River, CT 06417     (860) 526-4000     FAX 860-526-4654

Visit The Glue Store for your (schaeferec) edge coater supplies.